Activate ACC retrofit

    Hi I have retrofited this module in my a3 8v 2016
    The problem is it ask for a svm code.
    I do not have any clue how to get that code, audi dealers have removed the component protection but ask for svm code to activate it.
    In vcds i have this
    1 Faults Found:
    1807 - No Enable Indentifications Active
    B2032 00 [009]
    - [New feature! Extended UDS Fault Status: 00000001.
    Confirmed - Tested Since Memory Clear Freeze Frame:
    Fault Status: 00000001
    Fault Priority: 3
    Fault Frequency: 1
    Reset counter: 92
    Mileage: 47602 km
    Date: 2018.03.27
    Time: 16:56:15
    Control Module temperature: 31 ° C
    Voltage terminal 15: 12.3 V
    Vehicle speed: 0.00 m / s
    Acceleration: 0.00 m / s²


    Any help?


    Thanks

    Is it possible for you to place a complete VCDS scan here?
    Such a scan is needed.
    Without that it is realy hard to help you.

    VCP im PA, PAN, REG, DEG, EG Kreis und auch deutschlandweit via remote


    ACC / pACC Komplettumbauten, Allradumbau mit DQ250, DQ500, Nachrüstungen aller Art für die MQB , MLB Plattform,
    in Telegram zu finden unter Grubsche 8)
    Anfragen per Mail an: rg.coding.retrofit@gmail.com

    It seems it needs to be calibrated and if you have VCP available I would try to upload the ZDC for 5Q0 907 572 G first.
    Do be honest I'm not a specialist for ACC, because I never had it, but from what I have red, you also need to change the ABS unit as well, but this could be different for an A3.