hello, i retrofitted webasto on my octavia 3 rs tsi, but i coded in bcm anti-theft - parking heater, when i enable parking heater via remote control morning, webasto start after 1min car alarm, car alarm is from factory, need upgrade dwa parameter? OR? PLEASE ANY1 HELP ME? thank you 
Webasto retrofit
-
-
Only changing this one adaption channel will not activate the aux heater correctly. Additionally...
Stg 08
Coding
Byte 05 > Bit 4-7 = $40
Byte 06 > Bit 0-3 = $01Stg 18
Coding
Byte 00 > Bit 4-5 = $10Stg 19
Coding
Byte 13 > Bit 2 = enableAdaption
IDE10748-MAS11263 = activeStg 5F
Adaption
ENG122227-ENG117531-Car_Function_Adaptations_Gen2-menu_display_auxiliary_heating = active
ENG122227-ENG117533-Car_Function_Adaptations_Gen2-menu_display_auxiliary_heating_over_threshold_high = active
ENG122229-ENG117696-Car_Function_List_BAP_Gen2-auxilary_heating_0x03 = active
ENG122229-ENG117696-Car_Function_List_BAP_Gen2-auxilary_heating_0x03_msg_bus = Databus ComfortAfterwards you need to perform Climatronic button combinations:
- press for 5 seconds: AC + Blower: Head
- wait till done
- press for 5 seconds: AC + Read window heater
- wait till doneClear fault codes.
Stg 18
Basic setting
IDE00898 = run (at least 30 seconds)
IDE06639 or IDE06638 = run
IDE06650 = run -- press OFF on the sender
