-
Und dann habe ich die ganzen Späne im Scheinwerfer oder wie?
MFG
I have NO Späne im Scheinwerfer as I removed them frequently and cleaned it afterwards with compressed air.
the cuttings can't come in the optic as the bulb is present while removing.
On an other car I had some insects in the optic and removed them with a vacuumcleaner with a small tube (10mm)
taped in the original tube, removed the head bulb to have acces in the optic, this could be the procedure to eventualy remove the cuttings if not working the right way.
Be creative.
-
Moin!
Wie versprochen, ein kleines How-To, wie man die Blinkerleuchten beim 5E ohne Demontage irgendwelcher Teile durchführen kann.
Ich hoffe es hilft, bei Fragen einfach hier posten.
Da der Anhang leider größer als es zugelassen ist, müssen wir warten bis Wurmi es für mich anhängt.
Alles anzeigen
We had a different approach to remove the plastic cap maybe it can help somebody.
We used a hole saw from diameter 44mm and saw it by hand it took us 5min to remove.
Small hands are a Plus.
-
Here you can see mine, I made a negative and scanned and retouched it, now I have only to cut it with my plotter.
-
Here some images, sorry for the delay, holiday you know.
Just after the remove while the repair
After
Back of the logo
The VRS in front was the trickiest one, the other logo's are a piece of cake, just heat them a little with a hairdryer as the double sided tape become a little weak and pull the logo, an other way is to is cut with a fishwire the double side tape, I prefer the heating methode as I already removed many logo's from different brand all was going well. After do the Plastidip reattach with double sided tape (I only use 3m tape)
Hope I helped a little
-
I removed today the vRS logo from the front grill and repaired the damage on the grill as this was glued.
If someone is interested I will post some images from the remove and repair.
I also removed the front and rear logo as I like to Plastidip the rings and Skoda sign but
not the backing plate, if ones removed from the backing plate you can always remove them as you have to break
3 black plastic parts from the Skoda sign not from the ring, the ring can always be remove without remove the backing plate.
Sorry for the english , write German is not my cup of the.
-
-
