Zitat von Juergena

Today I finally activated my rain lock so that it works like it did in the old 1Z RS.

It must be said that the rain light sensor must be replaced. I swapped my factory installed sensor 5Q0955547B for the Audi sensor 81A955559A.

Then I re-coded the sensor with VCP and activated the rain close menu in the Columbus.

However, while coding I noticed that I suddenly have a "humidity sensor" error message. I have currently deactivated this. However, this message comes from the fact that the Audi sensor 81A955559A is the wrong one. It has to be an Audi sensor 81A955555A, as this also contains the moisture sensor. But nevertheless, the rain closure works and the other sensor has been ordered and will be installed shortly.

Alles anzeigen

Hello my friend did you tried the correct sensor (81A955555A)

Zitat von Juergena

Today I finally activated my rain lock so that it works like it did in the old 1Z RS.

It must be said that the rain light sensor must be replaced. I swapped my factory installed sensor 5Q0955547B for the Audi sensor 81A955559A.

Then I re-coded the sensor with VCP and activated the rain close menu in the Columbus.

However, while coding I noticed that I suddenly have a "humidity sensor" error message. I have currently deactivated this. However, this message comes from the fact that the Audi sensor 81A955559A is the wrong one. It has to be an Audi sensor 81A955555A, as this also contains the moisture sensor. But nevertheless, the rain closure works and the other sensor has been ordered and will be installed shortly.

Good evening friend, I did exactly what you did but with the correct sensor code. “I made the changes in the adaptation channels and set the coding 06Α8DD and also reset it to 5F.” However, the menu is not activated on the MMI 2.5 Columbus High. Can you help me?

Alles anzeigen

Good evening to everybody.

Today I installed the digital air conditioner and the modified frame.

First i coppied old coding from previous climatronic and paste it in new digital climatronic.

Then i made a basic adjustment by pressing the a / c button and the air direction at the same time.

Then I pressed the a / c button and the heated rear window at the same time to make the 1st start of the air conditioning compressor.

Everything worked perfectly, but in the diagnosis with vag com I saw the following errors

Address 08: Auto HVAC (J255) Labels: * None

Part No SW: 3G8 907 044 HW: 3G8 907 044

Component: Climatronic H10 0205

Coding: 01010004000100011005004000101000

Shop #: WSC 73430 790 00999

ASAM dataset: EV_AirCondiBHTCMQB3rTranc 001050

ROD: EV_AirCondiBHTCMQB3rTranc_001_SK37.rod

VCID: 6ADB99248DE94ED9FF-803E

Air quality sensor:

3 faults found:

197634 - Temperature Sensor for Rear Vent

B1089 15 [046] - Open or Short to Plus

Intermittent - Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Status: 00000001

Fault Priority: 3

Mileage: 26,482 km

Date: 11/16/2021

Time: 18:34:37

328453 - Motor for Rear Temperature Flap

B108E 54 [047] - Missing Calibration / Basic Setting

Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Status: 00000001

Fault Priority: 2

Fault Frequency: 1

Mileage: 26,482 km

Date: 11/16/2021

Time: 18:34:38

328455 - Position Sensor for Rear Temperature Flap Motor

B1096 15 [047] - Open or Short to Plus

Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Status: 00000001

Fault Priority: 2

Fault Frequency: 1

Mileage: 26,482 km

Date: 11/16/2021

Time: 18:34:38

my original vag com did not let me coding and i have this message above

tell me

are there 3 possible ways of basic settings , which is now the right choice of combinations of basic air conditioning settings

* [A / C] and [Rear defrost] buttons

* [A / C] and [blower with 3 arrows] buttons or

* [A / C] and [MENU] buttons

best regards

Vasilis

Hello everybody, what partnumber is compatible for car with sunroof ?

5G9 971 100 F

Or

5G9 971 100 B

Best regards

Vasilis

Zitat von Grubsche

Write me a PN, touch control panel with auxiliary heating and with a panel, I still have it : embarrassed:

Zitat von Grubsche

Write me a PN, touch control panel with auxiliary heating and with a panel I still have : embarrassed:

Hello my friend , i am knew in your company! Tell me please can you provide me complete kit 3G8907044 plus frame for Octavia Mk3 RS ? Send me your answer with pm.