This retrofit is done and is working a 100%
i would like to thank Grubsche
he made all coding and explaining a lot.... Top User

Next retrofit....Side Assist...

Hi

Ok, this is my full scan...
My main problem is the ACC activation, and because of that i have a lot of errors

Hi

Thank you for your answer.
No, i didn't, how can i do this?
Can you help me?

Thanks

Hi I have retrofited this module in my a3 8v 2016
The problem is it ask for a svm code.
I do not have any clue how to get that code, audi dealers have removed the component protection but ask for svm code to activate it.
In vcds i have this
1 Faults Found:
1807 - No Enable Indentifications Active
B2032 00 [009]
- [New feature! Extended UDS Fault Status: 00000001.
Confirmed - Tested Since Memory Clear Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 92
Mileage: 47602 km
Date: 2018.03.27
Time: 16:56:15
Control Module temperature: 31 ° C
Voltage terminal 15: 12.3 V
Vehicle speed: 0.00 m / s
Acceleration: 0.00 m / s²

Any help?

Thanks

Hi

Thank you for your answer
Ok
fisrst i had
5Q0907566 A and 5Q0907568 A and the my car everytime i was powering on i had the error "audi assist system fail"
I used vcds version 18.1 and the errors were
730.378 - Warning Lamp for Lane Change Assistance Driver Side Ext Mirror C1116 15 - Open or Short to Plus.
730634 -. Warning Lamp for Lane Change Assistance in Passenger Side Ext Mirror C1117 15 [009] - Open or Short to Plus

The supplier trade me the modules and i have received two modules
5Q0907566 and 5Q0907568
This time, after powering the car ... i didn ' t received that error "audi assist system fail"
I was able to go to the menu, car..system and see the audi page assist menu
eveytime it was "off", and when i was trying to turn it on i was receiving the error "audi assist system fail"
Again vcds and same errors
730378 - Warning Lamp for Lane Change Driver Side Ext Mirror C1116 15 - Open or Short to Plus.
730634 -. Warning Lamp for Lane Change Assistance in Passenger Side Ext Mirror C1117 15 [009] - Open or Short to Plus
So, the first set was faaulty ... no doubt
The second one was ok
So ... It's not possible that the radar units are compatible with the LEDs ??
About checking the wires
Both mirrors have 2 wires coming from 5Q0907568 unit (slave)
I use a voltimeter and have continuity on each side ... each wire. Really strange Any advice or clue?
I went to electrician's place.
Thanks

Hi

I have inverted the wires....and it still doing the same.
I have connected to a 12v battery and check the polarity.
The strange is two units giving me the same problem
I went to an electrician and told me the installation were ok

Regards

Two different modules and both with same errors

2 Faults Found:
730378 - Warning Lamp for Lane Change Assistance in Driver Side Ext Mirror C1116 15 - Open or Short to Plus.
730634 -. Warning Lamp for Lane Change Assistance in Passenger Side Ext Mirror C1117 15 [009] - Open or Short to Plus

Went to electrician and after measuring all wires that go the the mirrors he said they were ok...

I'm stuck now

Hi

I have those problems
2 Faults Found:
730378 - Warning Lamp for Lane Change Assistance in Driver-Side Ext Mirror
C1116 15 [009] - Open or Short to Plus.
730634 -. Warning Lamp for Lane Change Assistance in Passenger Side Ext Mirror
C1117 15 [009] - Open or Short to Plus

I have measured the wires and the two wires connected to the driver door (green and pink) , when i connect the car, green gives me 11.81 volts and the wire rose gives me 10/30 volts

The other side is exactly the same....

So all 4 wires connected to the led have positive voltage....

Any help

Hi

Can someone tell me wich part number connect to side assist led in mirror

I have all prepared but don't have the plug to connect to 8V2949145, 8V2949146 led

Thanks